Advertisement
Available languages
Available languages
EN
Congratulations on the purchase of machinery from the fastest growing brand of electric,
gasoline and pneumatic tools - RAIDER. When properly installed and operating, RAIDER are
safe and reliable machines and work with them will deliver a real pleasure. For your convenience
has been built and excellent service network of 45 service stations across the country.
Before using this machine, please carefully acquainted with these "instructions' manual".
In the interest of your safety and to ensure proper use and read these instructions carefully,
including the recommendations and warnings in them. To avoid unnecessary errors and
accidents, it is important that these instructions will remain available for future reference to all
who will use the machine. If you sell it to a new owner "Instructions' manual" must be submitted
along with it to enable new users to become familiar with relevant safety and operating
instructions.
Euromaster Import Export Ltd. is an authorized representative of the manufacturer and owner
of the trademark RAIDER.
Address: Sofia City 1231, Bulgaria "Lomsko shausse" Blvd. 246, tel +359 700 44 155, www.
raider.bg; www.euromasterbg.com; e-mail: info@euromasterbg.com.
Since 2006 the company introduced the system of quality management ISO 9001:2008 with
scope of certification: Trade, import, export and servicing of hobby and professional electrical,
mechanical and pneumatic tools and general hardware. The certificate was issued by Moody
International Certification Ltd, England.
Model
Voltage
Frequency
Power
No-load speed
Board size
Sanding sheet size
Protection Class
General description of the machine
Sander is powered by a collector of single-phase motor. Thanks to the use of adequate
insulation is not possible for metal parts that could be touched and yet could accidentally be
under tension. Sander does not require protective grounding (insulation class II).
Sander is designed for surface sanding of the final woodwork, polishing wooden surfaces
coated with varnish, polishing lacquered metal surfaces, removing rust or traces of polish
before re-polishing, finishing of metal surfaces, etc.
The areas of use are making repairs, carpentry and other work-related self-amateur activity.
Description of indications of machine elements:
1. Switch (on / off).
2. Hold button trigger button included in the situation (for convenience in a continuous
operation).
3. Brackets for attaching the sanding sheet.
Original instructions' manual
TECHNICAL SPECIFICATIONS
Parameter
Dear Customer,
Units of
measurement
min
RD-SA26
-
V
Hz
W
-1
mm
90x187
mm
90x230
-
7
Value
230
50
180
12000
II
Advertisement
