GE Multilin DDFR Instruction Manual page 28

SETTING UP COMPUTER-TO-DDFR ETHERNET COMMUNICATIONS
20
Note down your current TCP/IP configuration.
If your current TCP/IP setting is static, note down your IP Address,
Subnet Mask, and Default Gateway, as well as your Preferred
and Alternate DNS servers.
Click on the Use the following IP address radio button if you have
a dynamic IP Address.
Write the IP Address settings shown below, in the appropriate
boxes. You can leave the DNS Server section empty.
Press OK.
Launch the EnerVista DDFR Setup program.
Click on the DDFR Setup button.
The DDFR Setup window will appear as follows:
DISTRIBUTED DIGITAL FAULT RECORDER – INSTRUCTION MANUAL
CHAPTER 1: GETTING STARTED