Table of Contents
Advertisement
CHAPTER 1: GETTING STARTED
Note
DISTRIBUTED DIGITAL FAULT RECORDER – INSTRUCTION MANUAL
The DDFR is shipped from the Factory with the following default network parameters.
These parameters must be reconfigured immediately to ensure that Network IP address
conflicts do not occur.
Table 1–3: Default DDFR IP Configuration
IP Address
192.168.2.254
To reconfigure the DDFR network parameters in your new DDFR,
Press the DDFR Setup button at the top left of the screen, or
alternatively select Communications > DDFR Setup from the main
menu, to open the DDFR Setup Screen as shown in figure 1-4
below:
SETTING UP COMPUTER-TO-DDFR ETHERNET COMMUNICATIONS
Net Mask
255.255.255.0
FIGURE 1–4: DDFR Setup Screen
Gateway
192.168.2.1
13
Advertisement
Table of Contents
