GE Multilin DDFR Instruction Manual page 25

CHAPTER 1: GETTING STARTED
Note
DISTRIBUTED DIGITAL FAULT RECORDER – INSTRUCTION MANUAL
Enter the desired name in the DDFR Name field and a description
(optional).
Enter the IP Address of the DDFR.
Click the Read Order Code button to connect to the DDFR and
transfer the Order Code and firmware Version number from the
DDFR.
If a communications error occurs, ensure that the Ethernet
communications values correspond to the actual assigned setting
values.
If you wish to give the DDFR a new name, insert the new name in
the DDFR Name field, then click OK.
The new name will be saved in the DDFR.
If you have already assigned a (meaningful) name to the DDFR and you press the Read
Order Code button, the name will be changed automatically to the latest DDFR name
assigned.
SETTING UP COMPUTER-TO-DDFR ETHERNET COMMUNICATIONS
17