Gree GPC05AK-A3NNA2B Owner's Manual page 16

16
Malfunction code
H8
F1
F2
F0
H3
E8
F4
WARNING
• If there're following phenomenon, please turn off the air conditioner and
disconnect the power immediately, and then contact dealer immediately.
Power cord is overheating or damaged.
Abnormal sound during operation.
Off-flavor.
Water leakage
• Do not repair or refit the air conditioner by yourself.
• If operate the air conditioner under abnormal condition, it may cause
malfunction, electric shock or fire hazard.
© Copyright, GREE Canada, 2021
Chassis is full of water.
Malfunction of ambient
temperature sensor.
Malfunction of evaporator
temperature sensor.
1.Refrigerant is leaking
2.System is blocked
Overload protection for
compressor
Overload malfunction
Outdoor tube temperature
sensor is open/short-
circuited.
1. Pour out the water inside chassis.
2. If "H8" still exits, please contact
professional person to maintain the
unit.
Please contact professional
person to deal with it.
Please contact professional
person to deal with it.
1.Re-energize the unit after
turning off and pulling out the
plug for 30min;
2.If there's still malfunction,
please contact after-sales
service.
1.Check if the unit is under high-
temperature and high-humidity
environment; if ambient tempera-
ture is too high, power off the unit
and then energize it for operation
after the ambient temperature
drops below 35°C.
2.Check If the evaporator and
condenser are blocked by some
objects; if yes, take away the
objects, power off the unit and
then energize it for operation.
3.If the malfunction still occur,
please contact our after-sales
service center.
Please contact after-sale
service person
to deal with it.