How To Change User Pin - iStorage datashur User Manual

iStorage datashur · User Guide

2. How to change User PIN

CAUTION
If you forget your User PIN and no Admin PIN exists, or you forget
both PINs, all data will be inaccessible.
PIN requirements:
• Must be between 7-15 digits in length
• Must not contain repeating numbers/letters, e.g., (3-3-3-3-3-3-3)
• Must not contain sequential numbers/letters, e.g., (1-2-3-4-5-6-7),
(7-8-9-0-1-2-3-4-5-6), (7-6-5-4-3-2-1)
Instruction
1. Press button
2. Enter user PIN to unlock drive
and press
3. Press and hold
for 3 seconds
4. Enter new User PIN
5. Press button
6. Re-enter new User PIN
7. Press button
Note:
If a mistake was made while defining a new PIN or the procedure was not completed,
the drive will retain the old PIN.
20
Led activity
Red and Green LEDs blink together
Green blink
button Red and Green will illuminate together
Red and Green illuminated
Red and Green blink in unison
Red and Green blink in unison
Green blink if 1
Red and Green blink alternately if PIN
entry error If Red and Green LEDs blink
alternately, restart from step #3
and 2 entries match
st nd