Congratulations! You have just purchased a Leica E Series stereo In developing our stereo microscopes, we have microscope – an excellent choice! Viewing placed great emphasis on simple, self-explana- entire objects under magnification imparts tory operation. However, please take the time...
Chapter Overview Safety and Use Leica EZ4, Leica EZ4 E or Leica EZ4 W Eyepieces (Only for Leica EZ4) Photography Using the Leica EZ4 E or Leica EZ4 W Get Set! The Camera Remote Control (Optional) Care, Transport, Contact Persons...
Graticules: Preparation Safety Instructions Inserting the Graticules Regulatory Compliance Information (Regarding Leica EZ4 W Only) Photography Using the Leica EZ4 E or Leica EZ4 W Instructions for Use Introduction Leica EZ4, Leica EZ4 E or Leica EZ4 W The Basics...
Page 5
Contents (Continued) The Camera Remote Control (Optional) Dimensions Optional Remote Control Leica EZ4 E or Leica EZ4 W Viewing Images and Movies With the Optional Remote Control Leica EZ4, 10× Eyepieces Calling up the Camera Menu Leica EZ4 Without Eyepieces...
Functional disturbances or damaged instruments Warning of hazardous electrical voltage This symbol indicates especially impor- tant information that, if not observed, can cause the following: Hazards to personnel Functional disturbances or damaged instruments Leica E Series User Manual Safety and Use...
The "Safety Concept" booklet contains addi- Technical safety instrument. tional safety information regarding service To connect the Leica E Series microscopes to work, requirements and the handling of the power, use a power cable that meets the power microscope, accessories as well as general cable specifications in your country.
Page 9
Radio interference suppression in compli- directive. ance with EN 55011 class B Noise immunity in compliance with DIN EN 61326-1. Intended for indoor use only in all EU member states, EFTA states and Switzerland. Leica E Series User Manual Safety and Use...
Regulatory Compliance Information (Regarding Leica EZ4 W Only) FCC Requirements for Operation in the United States FCC radio frequency interference warnings FCC caution Connect the equipment into an outlet on and instructions a circuit different from that to which the...
Page 11
Regulatory Compliance Information (Regarding Leica EZ4 W Only) (Continued) Canada (IC) Australia and New Zealand Notices Brasil This device complies with Industry Canada This device equipment complies with the licence-exempt RSS standard(s). Operation is Australian and New Zealand regulatory approv- subject to the following two conditions: als requirements.
The power cable is provided Use in clean rooms as the power disconnect device. Leica E Series microscopes can be used in clean rooms without any problems. Leica E Series User Manual Safety and Use...
Page 13
– as this manual, repair and service work may mended). increases the risk class. Failure to observe this be carried out by authorized Leica technicians notice poses a risk of eye damage. only. Accessories...
1. 10× fixed eyepieces for eyeglass wearers 2. Carrying handle 3. Magnification changer 4. Focusing drive 5. Integrated LED incident light illumination 6. Illumination control 7. Integrated LED transmitted illumination Leica E Series User Manual Leica EZ4, Leica EZ4 E or Leica EZ4 W...
Instrument Variant: Leica EZ4 E or Leica EZ4 W 1. 10× fixed eyepieces for eyeglass wearers 2. Integrated digital camera with SD card slot 3. Mode selection panel (EZ4 E or EZ4 W) 4. Carrying handle 5. Magnification changer 6. IR receiver for optional remote control 7.
2. Connect the power supply to a grounded socket. 2. Store the instrument so that it is protected against dust. Leica E Series User Manual Leica EZ4, Leica EZ4 E or Leica EZ4 W...
You may need a short time to become familiar with using the instrument. Not to worry – after a little while, it will become automatic. Leica E Series User Manual Leica EZ4, Leica EZ4 E or Leica EZ4 W...
Use incident light for plastic, opaque baseplate. objects Use transmitted light for transmitted light specimens or transparent objects. Use the combination of both LED illumina- tors for partially transparent objects. Leica E Series User Manual Leica EZ4, Leica EZ4 E or Leica EZ4 W...
The LEDs flash twice slowly and then remain The LEDs flash three times slowly and then switched on. The automatic shutoff is now remain switched on. The automatic shutoff is disabled. now re-enabled. Leica E Series User Manual Leica EZ4, Leica EZ4 E or Leica EZ4 W...
(parfocal). 2. Set the working distance to approx. 100 mm for coarse focusing. Focusing drive torque Leica E Series User Manual Leica EZ4, Leica EZ4 E or Leica EZ4 W...
Leica EZ4. The magnification of the eyepieces is indicated on their outer surfaces, e.g. 10×/20, 16×/16 or 20×/12. Leica E Series User Manual Leica EZ4, Leica EZ4 E or Leica EZ4 W...
1. Grip the drive knobs with both hands and turn them towards each other until the desired resistance is reached during focus- ing. Leica E Series User Manual Leica EZ4, Leica EZ4 E or Leica EZ4 W...
Changing Eyepieces (Only for Leica EZ4, Open Version) Changing eyepieces Various eyepieces are available for the Leica EZ4, allowing the stereo microscope to be adapted even better to the specific require- ments. The following eyepieces are available for selec- tion: Eyepieces replaceable, fixed or adjustable: 10×/20, 16×/16 or 20×/12...
Eyepieces and Eyecups (Only for Leica EZ4, Open Version) Eyecups The eyecups can be replaced. Risk of infection Direct contact with eyepieces is a poten- tial transmission method for bacterial and viral infections of the eye. The risk can be minimized by the use of individual eyecups.
Dioptric Correction (Only for Leica EZ4, Open Version) Dioptric correction Adjusting Users with normal vision do not need adjust- The adjustable eyepieces for the Leica able eyepieces. An adjustable eyepiece is suffi- 1. Set the dioptric correction for both EZ4 are also available with built-in diop- cient for mild shortsightedness.
Page 29
9. Select the highest magnification and refocus if necessary. Now, if you adjust the magnification from the highest to the lowest level, the specimen is always brought into sharp focus. If not, repeat the process. Leica E Series User Manual Eyepieces (Only for Leica EZ4)
Graticules (Only for Leica EZ4, Open Version) Graticules Available eyepiece inserts The transparent graticules can be Graticules 10 mm/ 0.1 mm inserted in the adjustable eyepieces of 5 mm/ 0.1 mm the Leica EZ4. They enable easy measurements 5 mm/ 0.05 mm at the specimen.
Always hold the graticule by the edges! 1. Gently press the two small tabs on the snap 1. Screw the insert out counterclockwise. mount together and pull out the insert. Leica E Series User Manual Eyepieces (Only for Leica EZ4)
3. Carefully take hold of the edge of the grati- cule and push it sideways into the holder in the insert. Make sure that both plastic holders snap into place. 5. Insert the eyepiece into the tube. Leica E Series User Manual Eyepieces (Only for Leica EZ4)
Thank you for purchasing the Leica EZ4 E or Leica EZ4 W by Leica Microsystems. The special design of the Leica EZ4 E or EZ4 W makes it a universal, highly versatile tool for viewing microscopic specimens and capturing still images or video.
Aspect ratio is 16:9 except in USB mode where the aspect ratio 5. Capture button is 4:3. Captures image onto the SD card Leica E Series User Manual Photography Using the Leica EZ4 E or Leica EZ4 W...
1. LED status indicator Blinking red means starting up Green means ready 2. Capture button for SD card capture 3. Mode selection panel 4. SD card slot Leica E Series User Manual Photography Using the Leica EZ4 E or Leica EZ4 W...
Page 37
2. Ethernet socket for connecting an ethernet cable (cable not provided) 3. USB for connecting the provided USB cable Front Infrared window: Receives the signal from the optional remote control. Leica E Series User Manual Photography Using the Leica EZ4 E or Leica EZ4 W...
The contents include CD with imaging software, If you ordered the handheld remote, you received HDMI cable, and USB cable. the remote with batteries. Leica E Series User Manual Photography Using the Leica EZ4 E or Leica EZ4 W...
USB port, and attach the other the status light is green and one of the The Leica EZ4 E or Leica EZ4 W ’s field of view, end of the cable to a USB 2.0 port of your mode button's is also green. This may take however, is rectangular with a diagonal of computer.
Page 41
4:3 using the controls of the projector or monitor. 6. You are ready to launch the Leica software. Follow the software instructions to adjust and capture an image.
3. If a mode button other than SD mode is lit have an SD card (not provided) with free 1. Switch on the power to the EZ4 E or EZ4 W green, then press the SD mode button and memory on it. If the SD memory card is full, the microscope.
Page 43
The capture button LED will turn green. The Leica You will hear a beep to acknowledge the 6. While in SD mode, you can connect the EZ4 E or Leica EZ4 W is now ready to capture button was pressed. provided HDMI cable from the camera to images onto the SD memory card.
WiFi Mode – Capturing and Adjusting Images Using a Wireless Device (Only Available for Leica EZ4 W) 1. Switch on the power to the Leica EZ4 W 3. If a mode button other than WiFi mode is microscope. lit green, then press the WiFi button and wait until both the status LED and the WiFi 2.
PC for viewing, capturing, and adjusting the camera image. 2. Switch on the power to the Leica EZ4 E or 4. If a mode button other than ethernet mode EZ4 W microscope.
HD display. The only function which works in any mode is the "Info" function which shows details about the camera. Leica E Series User Manual The Camera Remote Control (Optional)
7. Brightness adjustment up or down 8. Pairing button 9. Show/hide information box 10. White balance set button 11. Call up the camera menu 12. Arrow keys for navigation 13. OK to confirm Leica E Series User Manual The Camera Remote Control (Optional)
Viewing Images and Movies With the Optional Remote Control If you have purchased the optional remote, the Leica HD camera shows images and movie clips directly on an HD moni- tor. 1. Thumbnail view (first press) up/down/left/right select thumbnail...
3. Press the and buttons to select a menu item. 4. Press the button to confirm a menu item. EZ4 E 5. Press the button again to hide the camera menus. EZ4 W Leica E Series User Manual The Camera Remote Control (Optional)
The values for "RED" and "BLUE" cannot be adjusted if the "WB MODE" setting is set to "AUTO". * SETUP WIFI only for EZ4 W The "COLOR" function makes it possible to adapt the camera chip to the ambient light so that color-neutral images can be acquired.
SETUP WIFI* SATURATION 5. If necessary, correct the values for "RED" and "BLUE" until the image shows a uniform gray area. * SETUP WIFI only for EZ4 W 6. Press the button to exit the menu. The "COLOR" function makes it possible to adapt the camera chip to the ambient light so that color-neutral images can be acquired.
SETUP USER GAMMA 4. Correct the values for "EXPOSURE", "GAIN" and "GAMMA" until you SETUP ETHERNET obtain the desired results for the image. * SETUP WIFI only for EZ4 W Leica E Series User Manual The Camera Remote Control (Optional)
SETUP WIFI* NETWORK STREAM Indicates the resolution of the live image when in WiFi or Ethernet mode. * SETUP WIFI only for EZ4 W The "RESOLUTION" menu enables you to define the resolution for the live image, still image capture and network stream individually.
You can decide to have a tone from the camera for some functions. LANGUAGE Select the language of the On Screen Display. * SETUP WIFI only for EZ4 W SELECTING IMAGE OVERLAYS (SELECT OVERLAY) The camera settings enable you to control internal parameters such Press to select another overlay.
Here you can decide to have the menu remain on screen for 10 seconds or until you press the menu button again. COLOR SHOW MENU 10 SECONDS EXPOSURE RESOLUTION SETUP CAMERA SETUP USER SETUP ETHERNET SETUP WIFI* * SETUP WIFI only for EZ4 W Leica E Series User Manual The Camera Remote Control (Optional)
Page 57
SETUP USER SETUP ETHERNET SETUP ETHERNET SETUP WIFI* SETUP WIFI* * SETUP WIFI only for EZ4 W IP ADDRESS This menu allows you to customize parameters relevant to working in Ethernet mode. Consult with your local IT expert for information You can decide if you want the IP address to be set by your network relating to your local network.
SETUP WiFi (Only for Leica EZ4 W) NAME (SSID) This is the camera name which will appear. You can change the name using the onscreen keyboard. COLOR Student8 NAME(SSID) EXPOSURE SECURITY OPTIONS WPA2PSK,AES SECURITY OPTIONS – NONE RESOLUTION PASSWORD(8 CHR) This means there is no password.
Pairing Cameras With Remotes Pairing 3. The microscope only responds to the The Leica EZ4 E or Leica EZ4 W and the remote control commands from this remote control can be paired and then remote control. only respond to each other. This can be helpful...
Leica representative. place. Protect the microscope from oil and grease. can find information on worldwide Leica Never grease or oil mechanical parts or representatives Leica website: If any optical surface becomes badly coated sliding surfaces.
Specifications Due to the technology of the camera, the speci- fications are changing regularly. Please visit website www.leica-microsystems.com/ education for the latest brochure downloads to find the up to date specifications. Leica E Series User Manual Specifications...
32 GB Integrated power 100 V – 240 V ~ 50 / 60 Hz supply Automatic adjustment to local voltage Power consumption max. 30 W (EZ4 E or EZ4 W), 15 W (EZ4) Leica E Series User Manual Specifications...
Need help?
Do you have a question about the EZ4 and is the answer not in the manual?
Questions and answers