Fiber Optic Ethernet Ports - Siemens SIMATIC NET RUGGEDCOM RSG2200 Installation Manual

Specifications
For specifications on the available copper Ethernet ports, refer to
Port Specifications (Page
4.2

Fiber Optic Ethernet Ports

Fiber optic Ethernet ports are available with either LC (Lucent Connector), SC
(Standard or Subscriber Connector) or ST (Straight Tip) connectors. Make sure the
Transmit (Tx) and Receive (Rx) connections of each port are properly connected and
matched to establish a proper link.
1
1
2
Figure 4.4
1
1
2
Figure 4.6
RUGGEDCOM RSG2200
Installation Manual, 04/2021, C79000-G8976-1043-17
Pin
10/100Base-TX
3 TX+
4 Reserved (Do Not Connect)
5 Reserved (Do Not Connect)
6 TX-
7 Reserved (Do Not Connect)
8 Reserved (Do Not Connect)
32)".
Tx Connector
Rx Connector
SC Port
Tx Connector
Rx Connector
ST Port
Name
1000Base-TX
BI_DB+
BI_DC+
BI_DC-
BI_DB-
BI_DD+
BI_DD-
2
1
Tx Connector
1
Rx Connector
2
Figure 4.5
2
Communication Ports
4.2 Fiber Optic Ethernet Ports
Description
Transmit Data+ or Bi-
Directional Pair B+
Transmit Data+ or Bi-
Directional Pair C+
Receive Data- or Bi-
Directional Pair C-
Transmit Data- or Bi-
Directional Pair B-
Receive Data- or Bi-
Directional Pair D+
Receive Data- or Bi-
Directional Pair D-
"Copper Ethernet
2
LC Port
25