Table of Contents
Advertisement
2.
3.
4.
5.
RUGGEDCOM RSG2200
Installation Manual, 04/2021, C79000-G8976-1043-17
Disconnect the cable from the port and install the dust cap to the cable end.
Squeeze the latches on either side of the port and pull it from the socket.
Socket
1
GBIC Optical Port
2
Locking Latch
3
Figure 4.9
Removing a GBIC Optical Port
Store the port in an ESD-safe bag or other suitable ESD-safe environment, free
from moisture and stored at the proper temperature (-40 to 85 °C or -40 to 185
°F).
Insert a dust plug into the socket opening to prevent the ingress of dust and dirt.
4.4.2 Removing a GBIC Optical Port
1
2
3
Communication Ports
29
Advertisement
Table of Contents
