Lightspeed Topcat LSRCNG User Manual page 19

Optional PageFirst Kit
This PageFirst feature for Topcat interfaces with an independent
classroom paging system. When the page is broadcast, all audio
from the system is muted, ensuring important school-wide
messages are never missed. Please note that PageFirst is not
compatible with telephone or IP-based paging systems.
HOW IT WORKS
1. PageFirst sensor clip is hung around a lead wire attached to
the classroom paging speaker.
2. The clip is hard-wired to the amplifier.
3. As a page is broadcast, the sensor clip detects the audio signal
through induction and immediately mutes the amplifier.
4. When the page is over, the audio from the amplifier returns to
normal volume level.
For full installation details, refer to the Topcat Installation Guide
USING ALERT NOTIFICATION
If your building is equipped with an alert notification system, you can use
the Flexmike to send an alert. This activates the contact closure function on
the 975, which external systems use to perform a prescribed action, such as
notifying the appropriate parties of a classroom alert.
To send an alert, simultaneously hold down the volume up and volume
down buttons on the Flexmike for three seconds.
19
PUSH AND HOLD
BOTH VOLUME
BUTTONS FOR
3 SECONDS
TO TOPCAT