Download Print this page
Elite Screens Evanesce Tension B Series User Manual

Elite Screens Evanesce Tension B Series User Manual

In-ceiling electric motorized front projection screen

Advertisement

Quick Links

In-Ceiling Electric Motorized Front Projection Screen
Evanesce Tension B Series
 
 
Important Safety & Warning Precautions
Make sure to read this user's guide and follow the procedures below. 
 
Caution:  The  screen's  Black  Top  Drop  is  already  set  to  its  maximum  drop  distance.  There  is  NO  extra 
Black  Top  Drop  in  the  roller.  Please  be  aware  of  this  as  it  will  void  your  warranty  with  Elite  Screens. 
Unapproved changes or modifications (except for cutting the power cord for hardwire installations) to 
this unit are prohibited and will void your warranty. For more information, please contact our Technical 
Support Department at (877) 511‐1211 Ext. 604. 
 
Please retain this user's guide for future reference. 
To avoid damaging the unit, do not use with any unauthorized accessories not recommended by
the manufacturer. 
Handle the unit carefully during transportation to avoid any damages. 
To ensure safe and reliable operation, direct connection to a properly grounded power source is 
advised. 
The power outlet supplying power to the unit should be close to the unit and easily accessible. 
Do not install the unit on uneven, inclined surfaces;  
Do not install in damp places to avoid an electric shock or short circuit. 
Do not place any heavy objects over the power cord. 
Position the power cord properly to avoid creating a trip obstacle. 
To avoid an electrical shock or fire, due to a loose contact or short circuit, do not overload the 
power cord. 
The internal & external parts of this unit are not end user serviceable. Do not attempt to 
disassemble this unit by yourself. No one except authorized technicians can open and make 
repairs to this unit. 
Make sure the power source that this unit is connected to has a continuous power flow. 
If there is need to use an extension cord, make sure the cord has an equal rating as the 
appliance to avoid over heat. 
Do not handle the power plug when your hands are wet or your feet are in contact with water. 
Properly dispose of this equipment according to the environmental regulations in your area 
when product is no longer of service. 
 
Rev.102212‐JA 
 
User's Guide
 
 
www.elitescreens.com 
 
 

Advertisement

loading
Need help?

Need help?

Do you have a question about the Evanesce Tension B Series and is the answer not in the manual?

Questions and answers

Summary of Contents for Elite Screens Evanesce Tension B Series

  • Page 1   In-Ceiling Electric Motorized Front Projection Screen Evanesce Tension B Series User’s Guide     Important Safety & Warning Precautions Make sure to read this user’s guide and follow the procedures below.    Caution:  The  screen’s  Black  Top  Drop  is  already  set  to  its  maximum  drop  distance.  There  is  NO  extra ...
  • Page 2: Installation Warning

    Do not use this unit under the following circumstances.  • Disconnect the power cord under the conditions of heavy rain, wind thunder or lightning.  • Avoid direct sun light, rain shower and moisture.  • Keep away from fire sources and high temperature to prevent this device from overheating.   • Cut off the power supply first before transportation or maintenance.  • To avoid possible injury and/or an electric shock, do not attempt to use this screen if there is    obvious damage or if there are any evident broken parts.   Installation Warning The instructions provided in this user’s guide are for reference only. Please consult a professional  installation company for further installation and safety advice. The installer must insure that proper  mounting hardware is used to provide adequate strength suitable for the installation. Elite Screens is  not liable for any faulty installations. For limit adjustment instructions, please contact our Technical  Support Department at (877) 511‐1211 Ext. 604    The Screen’s Top Black Drop is already set to its maximum drop distance. There is NO extra top black  drop in the roller. Please be aware of this as it will void the limitation of your warranty.    Individual modifications to this product are prohibited and will void the warranty with the manufacturer.   Please contact Elite Screens Customer Service for any questions.    NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,  pursuant to Part 15 of the FCC Rules.    These limits are designed to provide reasonable protection against harmful interference in a residential  installation. This equipment generates and can radiate radio frequency energy and, if not installed and  used in accordance with the instructions, may cause harmful interference to radio communications.    However, there is no guarantee that the interference will not occur on a particular installation. If this  equipment causes harmful interference to radio or television reception, which can be determined by  turning the equipment off and on, the user is encouraged to try to correct the interference by one or  more of the following measures.  Reorient or relocate the receiving antenna of the device which may be casing the interference. ...
  • Page 3 Red +          Green ‐    F. 5‐12v trigger cable  G. AAA  E. IR eye    D. 3‐way   Batteries x 2 receiver  wall switch        Control System for Evanesce Tension B Series             1.  5‐12V  Trigger:  The  built‐in  5‐12V  trigger  input  RJ45 input           ...
  • Page 4: Installation Instructions

      line of sight with a range of 100 feet.  contact with a beam range of 30 feet.      UP      St op     Down         Hardware Parts List for Evanesce Tension B Series Please make sure all parts listed below are included before proceeding with the installation.    Hardware Parts List for above ceiling installation  .  B.  C. End Flange x 2  Suspension Bracket x 2  Suspension   Bar x 4  C. M8x16mmx1.5mm   D. M6x13mmx2mm   E. M8 nut x 4  washer x 8  washer x 8  F. M6 nut x 4 ...
  • Page 5 A. Above ceiling installation instructions  Assembly  1. Place the hanging bracket (A) over the left and right side ends of the housing an d secure each  one using the M8x40mmhex screw (G), M8x16mmx1.5mm washers (C) and M8  nut (E) as  shown below.            Hanging Bracket (A)                                        2. Place the Suspension Bar (B ) over the Hanging Bracket (A) and align with the hole as shown  below according to th e hei ght requirement for your installation ar ea. ...
  • Page 6 3. Insert  the  end flange piece (C) on the edge of the housing as shown below to complete the assembly.   The sc reen is now ready for installation.                      Push end flange piece into  housing end until it snaps in          Dimensions Table: For Above ceiling installation reference                                       ...
  • Page 7 B. B elow ceilin g in stallation inst ns  Please  make sure all  parts  listed  below are included  before proceeding  with th e installation.  Hardw are Parts List for  below ceiling installati on  A. End Flange x 2  B.  Hang ing bracket x  2  C.  Threaded rod x 4  D. Socket wrench x 1  E.   M8x16mmx1.5mm    F. M8 nut x 20  G.M8  Top expanding bolt  x 4  H.  M8x40mm hex sc rew x 4 washer x 28    1.Measure and cut the ceiling installation slot: The width should not exceed 100mm and not less than the width of the screen’s housing. Measure the ...
  • Page 8 3.  The  M 8expanding  bolts  (G)  mo ount  into  thic ck  wood  beam ms,  stone  or  concrete  an d  will  suppor rt  the  reen.  Use  the  Socke et  wrench  (D D)  to  attach  t the  M8x40m mm  hexagona al  screws.  Th e ...
  • Page 9 6. Install end flange cover  panel (A)  between the gap and the screen to complete the installation.                    Dimensions Table: For below ceiling installation reference          Wall       Ceiling  Ceiling                      Ceiling            For local Elite Screens contact or Technical Support, please  visit www.elitescreens.com Rev.102212‐JA ...