Elite Screens Evanesce Series User Manual

In-ceiling front projection screen
Hide thumbs Also See for Evanesce Series:

Advertisement

Quick Links

Important Safety and Warning Precautions

Be sure to read this user guide before use and follow the procedures below.
Please retain this manual for future reference.
To avoid any damage, do not use in conjunction with any accessories not recommended by the manufacturer.
Handle the device carefully during transportation to avoid damage.
To ensure safe and reliable operation, direct connection to a properly grounded power source is advised.
The power outlet supplying power to the unit should be close to the unit and easily accessible.
Do not install the device on uneven or inclined surfaces.
Do not put heavy objects on the power cord and position it properly to avoid creating a trip obstacle.
Never overload the power cord to prevent an electric shock or fire.
Guard the device from any liquid or foreign objects to avoid electrical shock or fire due to loose contact or
short circuit.
There are no user serviceable parts in the device. Do not attempt to disassemble this device by yourself. No
one except authorized technicians can open this device to make repairs.
Make sure the power source this device is connected to has a continuous power flow.
If there is a need to use an extension cord, make sure the cord has the same equal rating as the appliance to
avoid overheat.
Do not handle the power plug when your hands are wet or your feet are in contact with water.
2. Do not use this device under the following circumstances:
Disconnect the power cord under the conditions of heavy rain, wind, thunder or lighting.
Avoid direct sunshine, rain shower or moisture.
Keep away from fire sources and high temperature to prevent this device from overheating.
Cut off the power supply first before transportation or maintenance.
Fully disconnect from the power supply when screen is not in use for a long period of time, as should be
done with any other electric household appliance.
To avoid possible injury and/or an electric shock, do not attempt to use the screen if there is obvious damage or if
there are any evident broken parts
WARNING:
The screen's Top Black Drop is already set to its maximum drop distance. There is NO extra black top drop in the
roller. Please be aware of this as it will void the limitation of your warranty.
Changes or modifications (except cutting the power cord for hardwire installation) to this unit not expressly
approved by Elite Screens is prohibited and will void the warranty.
In-Ceiling Front Projection Screen
Evanesce Series
User's Guide
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Evanesce Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Elite Screens Evanesce Series

  • Page 1 Please be aware of this as it will void the limitation of your warranty. Changes or modifications (except cutting the power cord for hardwire installation) to this unit not expressly approved by Elite Screens is prohibited and will void the warranty.
  • Page 2 The installer must insure the fasteners that are used are of adequate strength and suitable for the installation location. Accessories for Evanesce Series F. Bubble level Green 0V (-) Red 1 2V (+) E.
  • Page 3 1. 5-12V Trigger: The built-in 5-12V trigger RJ-45 input for 5-12 v input for your new CineTension2 allows your screen trigger to synchronize its drop and rise with the projector's power cycle. The screen drops when the projector powers up and retracts when the projector powers 5-12V RJ45 cable down.
  • Page 4 Power The Evanesce series screen includes a 3-prong power cord for using in a non-concealed power outlet. If your installation however will be entirely concealed including the power outlet, we strongly recommend a hardwire...
  • Page 5 A. Above ceiling installation instructions Assembly 2. Hanging bracket Assembly Place the Hanging Bracket (C) over the Casing Rail Nut (A) that’s located inside the channel of the screen’s case and secure it with the Hex Screw (B) 3. Suspension Bar Installation Place the Suspension Bars (D) on the Hanging Bracket (C) and align with the hole as shown below.
  • Page 6 The ceiling truss Ceiling Panel Ceiling installation space Ceiling 2. Drill 4 holes in the ceiling that correspond with the attachments on the various casing sizes. Install screw holes The ceiling wall 3. The expanding bolts (H) mount into thick wood beams, stone or concrete and will support the screen. Use the Socket wrench (N) to attach the hexagonal screws (K).
  • Page 7 (J) to ensure a firm connection. Use the socket wrench (N) to make sure that the bolts are firmly tightened. Ceiling Push Socket wrench (H) 5. Install plastic cover panel (O) to complete the installation. For local Elite Screens contact or Technical Support, please visit www.elitescreens.com...

Table of Contents