Advertisement
Exchanging stuck sanding discs
The hex key is placed in the centre hole of the output shaft of the sanding plate and turned clockwise.
The sanding sheet can be removed when firmly holding the sanding plate.
Attaching the dust bag
To protect the operator and to reduce dust during the work process (and thus cleaning up afterwards)
please connect the electric tool with the dust bag. As pictured below, one end needs to be connected
to the suction pipe and the other end to the dust bag.
Caution:
If you do not use a dust bag which suitable for drywall dust, the amount of dust particles in
the air will increase in the working area. Exposures of longer duration to increased amounts of dust in
the atmosphere can affect the respiratory tract.
© by WilTec Wildanger Technik GmbH
Item 61857
Page 8
http://www.WilTec.de
http://www.aoyue.eu
02
2021-1
http://www.teichtip.de
Advertisement
