Advertisement
Activation and deactivation
1. Connect the power cord (12) to a suitable power socket or extension cord.
2. In order to start the device, release the trigger lock (10) and keep pressing the trigger (13).
Beware!
The device will immediately operate at full speed.
3. To turn the device off, simply stop pressing the trigger (13).
the nylon thread will continue to turn, even after the device has been turned off. Wait for it to
stop before cleaning or transporting the device or making adjustments to it.
Installation and adjustment of the extension rod
Only make adjustments while the device has been turned off and
disconnected from its power supply.
1. Connect the extension rod (5) to the device by letting it
slide into the rod.
2. Fix it in place by turning the lock screw (15).
3. Secure it by inserting the safety pin (6).
In order to adjust its length, simply reverse the steps 1–3 and adjust it before securing it again.
Assembly
№
Name
1
Extension rod
2
Retainer
3
Protective cover
4
Cutting element
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
№
Name
5
Gearbox
6
Thread cutter
7
Spool
Item 61201
Warning:
The spool containing
Page 25
03
2021-1
Advertisement
