Advertisement
Do not expose the power cord to heat, oil, sharp edges or moving parts and make sure that it
is neither bent nor pinched. Damaged or entangled cables greatly increase the risk of electric
shock.
Always check the cable for signs of damage or wear before using the device. Do not use the
tool if its power cord or plug are damaged, and make sure to have it replaced by a qualified
electrician before the device is operated again.
Damaged or worn cables must not be repaired, but instead be replaced by a qualified electri -
cian.
When using the device outside, make sure to use an appropriate extension cord suitable for
outdoor use in order to decrease the risk of electric shock.
The use of the device in wet environments (e. g. rain) is strictly prohibited. If the use of the
device within an environment with high moisture levels cannot be avoided, make sure to equip
it with a fault-current circuit breaker in order to decrease the risk of electric shock.
Repairs and in-depth maintenance have to be performed by qualified personnel, and spare
parts used have to be of equal quality and authorised by the manufacturer in order to guaran-
tee a flawless and safe operation.
Always store the device in a dry and safe place inaccessible to children and unauthorised indi -
viduals.
Do under no circumstances attempt to modify the device, its accessories, or its power plug.
Modified devices are dangerous, and their use carries a great risk of accidents and electric
shock.
Personal safety
Always stay attentive and do not use this device while being tired or exhausted or under the
influence of alcohol, drugs or medication.
Take all necessary precautions in order to prevent an accidental operation of the device. Do
not press the trigger when carrying the device, and make sure that it has been turned off be-
fore connecting it to a power supply. A loss of control can lead to property damage and severe
injuries.
Always wear appropriate protective gear including, but not limited to safety goggles, ear pro -
tection, safety gloves and non-skid safety shoes when operating the device.
Ensure that all adjusting tools or wrenches have been removed from the device before switch-
ing it on. Adjusting tools might get caught up in moving parts and cause damage to the device
as well as severe injuries.
Do not overreach and always ensure a safe stand.
Always make sure to treat power tools with care, to keep them clean, sharp and in pristine
condition by performing maintenance on a regular basis in order to ensure a flawless function -
ality. Sharp and clean tools are easier and safer to handle while poorly maintained tools in -
crease the risk of accidents.
Make sure that moving parts can move without any kind of obstruction before starting the
device.
Damaged or worn power tools must not be operated, as their condition greatly affects their
performance and safety. Have damaged parts repaired or replaced by a qualified electrician,
and do not use the device unless it is in pristine condition.
Only use tools for their intended purpose and always operate them at a speed appropriate for
them. Forcing a tool decreases its efficiency and increases the risk of accidents.
Pole pruner specific safety information
Keep all parts of the body away from the chainsaw blade. Do under no circumstances attempt
to remove cuttings from the blade or hold material that is to be cut while the device is running.
Cuttings should only be removed after the device has been turned off and when it is ensured
that it cannot be started by accident.
Only carry the device by its handle and only while its blades are not moving. If storing or trans-
porting the device, make sure to secure the blades with the appropriate protective cover.
Treating the device with care decreases the risk of accidents.
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Item 61201
Page 12
03
2021-1
Advertisement
