Advertisement
Technical manual
№ Name
1
Blade cover
2
Chain saw blade
3
Fixing
4
Oil tank
5
Extension rod
6
Safety pin
7
Adjustable handle
8
Lug
Activation and deactivation
1. Connect the power cord (12) to a suitable power socket or extension cord.
2. In order to start the device, release the trigger lock (10) and keep pressing the trigger (13).
Beware!
The device will immediately operate at full speed.
3. To turn the device off, simply stop pressing the trigger (13).
to turn, even after the device has been turned off. Wait for it to stop before cleaning or trans -
porting the device or making adjustments to it.
Assembly
Installation and adjustment of the extension rod
Only make adjustments while the device has been turned off and
disconnected from its power supply.
1. Connect the extension rod (5) to the device by letting it
slide into the rod.
2. Fix it in place by turning the lock screw (15).
3. Secure it by inserting the safety pin (6).
In order to adjust its length, simply reverse the steps 1–3 and adjust it before securing it again.
Harness
Warning:
The harness has to be correctly attached to the device and has to be usable before the
device is operated.
1. Before operating the device, ensure that the har-
ness is set to an appropriate and comfortable
length. It is important that the device is positioned
parallelly to the ground when the harness is worn.
2. Position the shoulder pads accordingly in order to
guarantee a maximum of comfort and safety. Make
sure that the clips are pointing forward, and fix the
pads in place.
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
№ Name
9
Lock
10 Trigger lock
11 Rod
12 Power cord
13 Trigger
14 Suspension
15 Lock screw
Warning:
Item 61201
The chain will continue
Page 16
03
2021-1
Advertisement
