Advertisement
Quick Links
Operation Manual
Brush Cutter
61201
Illustration similar, may vary depending on model
Read and follow the operating instructions and safety information before using for the first time.
Technical changes reserved!
Due to further developments, illustrations, functioning steps and technical data can differ insignific -
antly.
Updating the documentation
If you have suggestions for improvement or have found any irregularities, please contact us.
Advertisement
Related Manuals for WilTec 61201
Summary of Contents for WilTec 61201
- Page 1 Operation Manual Brush Cutter 61201 Illustration similar, may vary depending on model Read and follow the operating instructions and safety information before using for the first time. Technical changes reserved! Due to further developments, illustrations, functioning steps and technical data can differ insignific - antly.
- Page 2 All rights reserved. The WilTec Wildanger Technik GmbH cannot be held accountable for any possible mistakes in this operating manual, nor in the diagrams and figures shown.
-
Page 3: Safety Instructions
The power plug of the device has to match the power socket and must not be altered in any way. Matching sockets and original plugs minimise the risk of electric shock. Do not use adapter plugs with earthed power tools. © by WilTec Wildanger Technik GmbH Item 61201 Page 3 http://www.WilTec.de http://www.aoyue.eu 2021-1 http://www.teichtip.de... - Page 4 Only carry the device by its handle and only carry it while its blades are not moving. If storing or transporting the device, make sure to secure the blades with the appropriate protective cover. Treating the device with care decreases the risk of accidents. © by WilTec Wildanger Technik GmbH Item 61201 Page 4 http://www.WilTec.de http://www.aoyue.eu...
-
Page 5: Residual Risk
1. Connect the extension rod (5) to the device by letting it slide into the rod. 2. Fix it in place by turning the lock screw (15). 3. Secure it by inserting the safety pin (6). © by WilTec Wildanger Technik GmbH Item 61201 Page 5 http://www.WilTec.de... - Page 6 Balde length (cm) Max. cutting circle (mm) 24 © by WilTec Wildanger Technik GmbH Item 61201 Page 6 http://www.WilTec.de http://www.aoyue.eu 2021-1 http://www.teichtip.de...
- Page 7 Allow the gearbox to cool down before lubricat - ing it. The gearing should be lubricated after every 25 hours of operation. Use the grease nipple (18) in order to properly lubricate it. © by WilTec Wildanger Technik GmbH Item 61201 Page 7 http://www.WilTec.de http://www.aoyue.eu...
- Page 8 © by WilTec Wildanger Technik GmbH Item 61201 Page 8 http://www.WilTec.de http://www.aoyue.eu 2021-1 http://www.teichtip.de...
-
Page 9: Maintenance
Always store the device in a dry environment inaccessible to children. Make sure to use the protective cover to keep the blades of the device secure. © by WilTec Wildanger Technik GmbH Item 61201 Page 9 http://www.WilTec.de http://www.aoyue.eu 2021-1 http://www.teichtip.de... -
Page 10: Pole Pruner
Operation Manual Pole Pruner 61201 Illustration similar, may vary depending on model Read and follow the operating instructions and safety information before using for the first time. Technical changes reserved! Due to further developments, illustrations, functioning steps and technical data can differ insignific - antly. - Page 11 Do not pull at the power cord of the device and do not abuse it to lift, carry or hold the device. © by WilTec Wildanger Technik GmbH Item 61201 Page 11 http://www.WilTec.de...
- Page 12 Only carry the device by its handle and only while its blades are not moving. If storing or trans- porting the device, make sure to secure the blades with the appropriate protective cover. Treating the device with care decreases the risk of accidents. © by WilTec Wildanger Technik GmbH Item 61201 Page 12 http://www.WilTec.de http://www.aoyue.eu...
-
Page 13: Technical Specifications
Weight (kg) Noise emission: A-weighted sound pressure (L ) (dB(A)) 95.6 Inaccuracy (K ) (dB) A-weighted sound power (L ) (dB(A)) 101.6 Inaccuracy (K ) (dB) © by WilTec Wildanger Technik GmbH Item 61201 Page 13 http://www.WilTec.de http://www.aoyue.eu 2021-1 http://www.teichtip.de... - Page 14 © by WilTec Wildanger Technik GmbH Item 61201 Page 14 http://www.WilTec.de...
- Page 15 © by WilTec Wildanger Technik GmbH Item 61201 Page 15 http://www.WilTec.de http://www.aoyue.eu 2021-1 http://www.teichtip.de...
- Page 16 2. Position the shoulder pads accordingly in order to guarantee a maximum of comfort and safety. Make sure that the clips are pointing forward, and fix the pads in place. © by WilTec Wildanger Technik GmbH Item 61201 Page 16 http://www.WilTec.de http://www.aoyue.eu...
- Page 17 Always operate the device with both hands, and do not rush. When planning on cutting multiple branches, make sure to start with the lower ones and slowly work your way up. © by WilTec Wildanger Technik GmbH Item 61201 Page 17 http://www.WilTec.de http://www.aoyue.eu 2021-1 http://www.teichtip.de...
- Page 18 When storing the device, always cover the chain saw with its protective cover. Always store the device in a dry environment inaccessible to children. © by WilTec Wildanger Technik GmbH Item 61201 Page 18 http://www.WilTec.de http://www.aoyue.eu 2021-1...
- Page 19 Due to further developments, illustrations, functioning steps and technical data can differ insignific - antly. Updating the documentation If you have suggestions for improvement or have found any irregularities, please contact us. © by WilTec Wildanger Technik GmbH Item 61201 Page 19 http://www.WilTec.de http://www.aoyue.eu...
- Page 20 Do not pull at the power cord of the device and do not abuse it to lift, carry or hold the device. © by WilTec Wildanger Technik GmbH Item 61201 Page 20 http://www.WilTec.de...
- Page 21 Cuttings should only be removed after the device has been turned off and when it is ensured that it cannot be started by accident. © by WilTec Wildanger Technik GmbH Item 61201 Page 21 http://www.WilTec.de...
- Page 22 ) (dB) A-weighted sound power (L ) (dB(A)) Inaccuracy (K ) (dB) Acceleration: -front handle ( 3.012 s² -rear handle ( 3.337 s² Inaccuracy ( s² © by WilTec Wildanger Technik GmbH Item 61201 Page 22 http://www.WilTec.de http://www.aoyue.eu 2021-1 http://www.teichtip.de...
- Page 23 Lock Spool 10 Trigger lock Gearbox 11 Rod Protective cover 12 Power cord Extension rod 13 Trigger Safety pin 14 Suspension Adjustable handle 15 Lock screw © by WilTec Wildanger Technik GmbH Item 61201 Page 23 http://www.WilTec.de http://www.aoyue.eu 2021-1 http://www.teichtip.de...
- Page 24 © by WilTec Wildanger Technik GmbH Item 61201 Page 24 http://www.WilTec.de http://www.aoyue.eu 2021-1 http://www.teichtip.de...
- Page 25 In order to adjust its length, simply reverse the steps 1–3 and adjust it before securing it again. Assembly № Name № Name Extension rod Gearbox Retainer Thread cutter Protective cover Spool Cutting element © by WilTec Wildanger Technik GmbH Item 61201 Page 25 http://www.WilTec.de http://www.aoyue.eu 2021-1 http://www.teichtip.de...
- Page 26 7. Thread the loose thread ends into the holes of the spool and correctly reinsert the coil along with the washer and the spring. 8. Close the cover of the spool and reattach it to the device. © by WilTec Wildanger Technik GmbH Item 61201 Page 26 http://www.WilTec.de http://www.aoyue.eu 2021-1 http://www.teichtip.de...
- Page 27 Clean the device before storing it for longer periods of time and before it is re-used. Always store the device in a dry environment inaccessible to children. © by WilTec Wildanger Technik GmbH Item 61201 Page 27 http://www.WilTec.de http://www.aoyue.eu...
- Page 28 All WilTec electric devices that fall under the WEEE regulations are labelled with the crossed-out wheeled waste bin logo. This logo indicates that this electric equipment must not be disposed with the domestic waste.