Advertisement
2. Installation
Switch off ignition and disconnect the vehicle's battery! The interface needs a
permanent 12V source. If according to factory rules disconnecting the battery
is to be avoided, it is usually sufficient to put the vehicle is sleep-mode. In
case the sleep-mode does not show success, disconnect the battery with a
resistor lead.
If power source is not taken directly from the battery, the connection has to be
checked for being start-up proven and permanent.
2.1.
Place of installation
The interface is installed on the backside of the navigation.
2.2.
Removal of head unit
Unlock the navigation unit and remove it from the
dashboard.
Version 21.05.2010
ZL-MFD1
Advertisement
