Compaq 5000 Series Manual page 6

You do not have to replace the
screw securing the side access
panel. The screw securing the
side panel is used for shipping
purposes only.
6
II. Opening the Side Access Panel
1. Remove the screw 1 securing the side access panel.
Locate the latch 2 directly below the screw, press down,
and hold in the down position (see Figure 2-1).
Important: Some models may not have a screw
for shipping purposes only.
2. Grab the handle and slide the side panel from the chassis
(see Figure 2-2).
L
Caution: Before doing any work inside your computer, ground
yourself by touching a metal part of the chassis.
Figure 2-1
1
. This screw is used
Figure 2-2
C L
USTOMIZE THE OOK OF
Y C
OUR OMPUTER