Titan TTB671VAC Manual page 21

TTB671VAC by TITAN
Switching on/off
> Press the on/off switch (1) to switch the
product on.
> Press the on/off switch (1) again to
switch the product off (Fig. 13).
General operation
> Check the product, its power cord and plug as well as accessories for damage
before each use. Do not use the product if it is damaged or shows wear.
>
> Ensure that the air vents are always unobstructed and clear. Clean them if
necessary with a soft brush. Blocked air vents may lead to overheating and
damage the product.
> Switch the product off immediately if you are disturbed while working by other
people entering the working area. Always let the product come to complete
stop before averting.
> Do not overwork yourself. Take regular breaks to ensure you can concentrate
on the work and have full control over the product.
Vacuuming
> Attach the desired attachment onto the suction handle (13) / suction tube (14).
NOTE: Only use the correct attachment according to the intended use
(see chapter "Accessories").
>
> Keep the attachment on the working surface in front of you.
> Move in slight overlapping
rows. The most effective
pattern is straight
along one of the sides. This
will keep the rows even
and ensures that the entire
working surface is cleaned
up without missing any spots
(Fig. 14).
lines
Product functions / Operation
1
Fig. 13
Fig. 14
EN EN
21