Titan TTB671VAC Manual page 23

TTB671VAC by TITAN
The golden rules for care
WARNING! Always switch the product off, disconnect the product from
the power supply and let the product cool down before performing
inspection, maintenance and cleaning work!
> Keep the product clean. Remove debris from it after each use and before
storage.
> Regular and proper cleaning will help ensure safe use and prolong the life of
the product.
> Inspect the product before each use for worn and damaged parts. Do not
WARNING! Only perform repairs and maintenance work according to
specialist!
General cleaning
> Clean the product with a dry cloth. Use a brush for areas that are hard to
reach.
> In particular clean the air vents (20d) after every use with a cloth and brush.
> Remove stubborn dirt with high pressure air (max. 3 bar).
NOTE: Do not use chemical, alkaline, abrasive or other aggressive
detergents or disinfectants to clean this product as they might be
harmful to its surfaces.
> Check for worn or damaged parts. Replace worn parts as necessary or contact
an authorised service centre for repair before using the product again.
Maintenance
Before and after each use, check the product and accessories (or attachments)
for wear and damage. If required, exchange them for new ones as described in
this instruction manual. Observe the technical requirements.
Operation / Care and maintenance EN EN
23