Titan TTB671VAC Manual page 26

EN EN Care and maintenance
UK plug
IMPORTANT: The wires in the mains lead are coloured in accordance with the
following code:
Blue – Neutral Brown – Live
As the colours of the wire in the mains lead of this product may not correspond
with the coloured marking identifying the terminals in your plug, proceed as
follows. The wire, which is coloured blue, must be connected to the terminal,
which is marked with N or coloured black. The wire, which is coloured brown,
must be connected to the terminal, which is marked L or coloured red.
Outer sleeve
WARNING! Never connect live or neutral wires to the earth terminal of
the plug, which is marked with E.
NOTE:
care in disposing of the plug and severed cable, it must be destroyed
to prevent engaging into a socket.
Storage
> Switch the product off and disconnect it from the power supply.
> Switch off the attached power tool and disconnect it from the power tool
adaptor if using the product as a dust extraction device.
26
Connect
Blue to
N(Neutral)
TTB671VAC by TITAN
.
13 AMP fuse
approved to
BS 1362
Brown L(Live)
Cable grip