Titan TTB671VAC Manual page 17

TTB671VAC by TITAN
Combination nozzle
>
(15b) before using the combination
nozzle (15) (Fig. 8). Fix the combination
use to prevent movement of the nozzle
head during transport.
> Use the brush switch (15a) according to
the intended application (Figs. 9, 10).
Fig. 9
Connection to power supply
> Make sure the on/off switch (1) is not pressed.
> Pull the power cord (17) outward and connect the plug with a suitable socket.
WARNING! Check the voltage! The voltage must comply with the
information on the rating label!
WARNING! If vacuuming for extended period of time (> 30 minutes),
the power cord must be completely pulled out. Otherwise there is a
danger of overheating and damage.
> Your product is now ready to be used.
Before you start
15b
15a
Fig. 8
Fig. 10
EN
17