Attendant Contact For "Off-Hook; Conferences (6T, 7T And 8T) - Commend C-G3-TEL Product Manual

General telephone functions

Attendant contact for "off-hook"

For the telephone interface, an attendant contact can be defined. This contact becomes active as soon
as the telephone interface goes off-hook (as soon as the call number of telephone interface is dialled).
NOTE: V24 messages
If a (listed) call number has been defined for the attendant contact, it is possible to put out V24 mes-
sages (e.g. for Studio).
Configuration CCT 800
 Subscriber > Attendant contacts
 Right-click on the telephone interface and select the option "Add attendant contact".
 Subscriber > Attendant contacts > folder Attendant contact
 Right-click on the blank background and select "Add Output".
 Subscriber > Attendant contacts > folder Attendant contact > tab Call no. / Function
 Click on Configure Functions.
 In the field Call no. / Function, enter the call number of the telephone interface.
 Click on Accept.
NOTE: ICX messages
For information on configuration to put out ICX messages, see manual "ICX Protocol".

Conferences (6T, 7T and 8T)

ATTENTION: Telephone interface as conference subscriber

Talk only with mode T key: Tap.
 The max. time simplex for the telephone interface has to be set to 1 second (Interfaces > TEL >
folder Telephone Interface > Telephone functions).
The following conference features are available:
 6T: radio conference
 Listening to a channel and talking into a channel at the telephone.
NOTE: Cancel listening
Listening to a radio channel can be cancelled with "6T0".
 7T: predefined conference
 Initiating a "7T conference" at the telephone.
NOTE: 7Tx participant
It is not possible to invite a telephone as "7Tx participant" automatically.
 8T: conference
 On the telephone, a conference can be initiated in the Intercom system. The telephone can also be
invited by an Intercom station to a conference.
NOTE: Further information
For further information on conferences, see manual "Intercom Server Configuration".
28
G8-TEL / G3-TEL
2.0/0817