Commend C-G3-TEL Product Manual page 12

Auto-dialler mode
Examples for the call procedure
In the following two examples, the difference of the call procedures via dialling interface and a call
request and/or input message is shown. The optional points require an appropriate configuration in
CCT 800.
Call via dialling interface
Intercom station
– Initiate a call
– Calm down message
– Cancel call
Call request/input message
Intercom station
– Initiate a call
– Calm down message (optional)
– Cancel call
12
(within the public telephone net)
Outgoing call
Call
– Telephone is ringing
– Going off-hook
– Location message
– Enter password
– Individual message (optional)
Conversation
– Cancel call
End
(within the public telephone net)
Outgoing call
Call
– Telephone is ringing
– Going off-hook
– Location message
– Call request message
– Enter password
– Individual message (optional)
– Dial tone (optional)
– Take over call with "#"
– Individual message (optional)
Conversation
– Cancel call
End
Telephone
Telephone
G8-TEL / G3-TEL
2.0/0817