Call Request In Pabx Mode; Incoming Call From The Telephone To The Intercom System - Commend C-G3-TEL Product Manual

G8-TEL / G3-TEL
Define a range of numbers via wildcards
To simplify the configuration in CCT 800, it is possible to define a range of phone numbers as "wild-
cards" (see "Configure PABX mode" on page
phone numbers included by those wildcards can be dialled at the Intercom stations as explained at
"Phone call by dialling the telephone interface manually" on page
Examples
PA code via CCT 800
4***
63**
345*
5*
ATTENTION: Collisions
Avoid collisions with Intercom call numbers and function codes. That is, in case of a defined range of
"2***", e.g. the three-digit Intercom call number "210" cannot be dialled.
Cancel conversation
 A conversation can be cancelled at the telephone with "#" or at the Intercom station with X.
NOTES: Cancel conversation
 To cancel a phone call initiated by dialling the interface manually at the telephone with "#", the
function "After-dialling at the telephone (outgoing phone call)"
 When an outgoing conversation is cancelled, the (call) connection to the Intercom system will also
be disconnected (contrary to incoming calls,
 If the telephone is hung up without pressing "#", the conversation is automatically cancelled after
approx. 6 seconds.

Call request in PABX mode

For call requests and input messages, it is possible to combine auto-dialler mode with PABX mode.
This means:
 At initiation of a call request or input message, a switch-over to
automatically. As a result, the respective features of this mode will become effective
 In spite of that feature, a phone call can still be set up as described at
Intercom system" on page

Incoming call from the telephone to the Intercom system

NOTE: Configuration
In case of a initiated incoming call from a telephone to the Intercom system, the location message and, if
configured, individual messages are switched on at the telephone (same as in auto-dialler mode).
Initiate call
A call in PABX is initiated in the same way as in auto-dialler mode
Cancel conversation
A conversation in PABX mode is cancelled in the same way as in auto-dialler mode
2.0/0817
24). Per wildcard, max. 41 entries are possible. The tele-
Call number range
4000 to 4999
6300 to 6399
3450 to 3459
50 to 59
see page
22.
22.
has to be activated.
13).
"Auto-dialler mode"
"Outgoing phone call from the
(see page 13).
PABX mode
is initiated
(see page 10).
(see page 13).
23