Introduction; Purpose Of This Documentation; Further Information - Siemens SITRANS DA400 Operating Instructions Manual

Process monitoring

Hide thumbs Also See for SITRANS DA400:

Table of Contents

Introduction

1.1

These instructions contain all the information you need for commissioning and using the

device.

It is aimed both at persons mechanically installing the device, connecting it electronically,

configuring the parameters and commissioning it as well as service and maintenance

engineers.

1.2

Information

The contents of these instructions shall not become part of or modify any prior or existing

agreement, commitment or legal relationship. All obligations on the part of Siemens AG are

contained in the respective sales contract which also contains the complete and solely

applicable warranty conditions. Any statements contained herein do not create new

warranties or modify the existing warranty.

The content reflects the technical status at the time of printing. We reserve the right to make

technical changes in the course of further development.

Worldwide contact person

If you need more information or have particular problems which are not covered sufficiently

by the operating instructions, get in touch with your contact person. You can find contact

information for your local contact person in the Internet.

Product information on the Internet

The Programming Manual is an integral part of the companion CD, which may be ordered

separately. In addition, the Programming Manual is available on the Internet on the Siemens

homepage.

On the CD you will also find the technical data sheet containing the ordering data, the Device

Install software for SIMATIC PDM for subsequent installation and the required software.