Thermo Scientific Cryofuge 16 Instruction Manual page 6

Thermo Scientific Cryofuge 16 Heavy Duty Water Cooled Centrifuges
Table of Figures
Figure I-1: Centrifuge clearance, example with barcode scanner .......................................... I-2
Figure III-1: Overview centrifuge and rotor, e.g. HAEMAFlex 12 ...........................................III-2
Figure III-2: Align windshield knob and drive shaft .............................................................III-3
Figure III-3: Identify the circular marking, e.g. HAEMAFlex 8 and 12 ...................................III-3
Figure III-4: Rotor locking tool. ...........................................................................................III-4
Figure III-5: Put the rotor locking tool. ................................................................................III-4
Figure III-6: Tighten the rotor to the drive shaft. ..................................................................III-5
Figure III-7: Lubricate trunnion pins, e.g. HAEMAFlex 12 .....................................................III-5
Figure III-8: Install buckets into rotor, e.g. HAEMAFlex 12 ....................................................III-6
Figure III-9: Correctly assembled round bucket ...................................................................III-6
Figure III-10: Correct Loading ............................................................................................III-7
Figure III-11: Incorrect Loading ..........................................................................................III-7
Figure III-12: Insert windshield lid into holder ....................................................................III-8
Figure III-13: Select program ...........................................................................................III-11
Figure III-14: Remove the rotor from the drive shaft. .........................................................III-13
Figure IV-1: Cleaning rotor bolts and bucket bearing surfaces ............................................ IV-4
Figure V-1: Marking on windshield lid .................................................................................V-1
Figure V-2: Position of the mechanical emergency door release ...........................................V-2
Figure V-3: Example for an error message ..........................................................................V-3
v