Csm Configuration - Advantech ARS-2110TX User Manual

Railway embedded box pc
Table of Contents

Advertisement

Target Link Speed
This item allows users to set an upper limit on operational speed.
Clock Power Management
This item allows users to enable or disable the device to use CLKREQ# signal for power
management of Link clock in accordance to protocol defined.
Compliance SOS
This item allows users to enable or disable forcing LTSSM to send SKP Ordered Sets
between sequences when sending Compliance Pattern or Modified Compliance Pattern.
Hardware Autonomous Width
This item allows users to enable or disable the hardware's ability to change link width except
width size reduction for the purpose of correcting unstable link operation.
Hardware Autonomous Width
This item allows users to enable or disable the hardware's ability to change link speed except
speed rate reduction for the purpose of correcting unstable link operation.
3.3.10

CSM Configuration

Figure 3.17 CSM Configuration
CSM Support
This item allows user to enable or disable CSM support.
GateA20 Active
This item allows user to enable or disable GA20.
Option ROM Messages
This item allows user to set display mode for Option ROM.
INT19 Trap Response
This item allows user to set the trap execution policy.
Boot Option Filter
41
ARS-2110 User Manual

Advertisement

Table of Contents
loading

Table of Contents