Advantech ARS-2110TX User Manual page 52

This item allows users to define the number of microseconds which software will wait before
polling 'Link Training' bit in link status register.
Unpopulated Links
This item allows users to keep unpopulated PCIE links on or disable to save power.
Restore PCIE Register
This item allows users to enable or disable restoring PCIE device configurations on S3
resume.
Figure 3.16 PCI Express GEN 2 Settings
Completion Timeout
This item allows users to modify the completion timeout value.
ARI Forwarding
This item allows users to enable or disable downstream port enforcing the Device Number = 0
restriction.
AtomicOp Requester Enable
This item allows users to enable or disable AtomicOp Requests initiate if Bus Master Enable
bit is in the command register set.
IDO Request Enable
This item allows users to enable or disable the initiate of the number of ID-Based Ordering
(IDO) bit request.
IDO Completion Enable
This item allows users to enable or disable the initiate of the number of ID-Based Ordering
(IDO) bit request.
LTR Mechanism Enable
This item allows users to enable or disable the Latency Tolerance Reporting Mechanism.
End-End TLP Prefix Block
This item allows users to enable or disable blocking forwarding of TLPs containing End-End
TLP Prefixes.
40 ARS-2110 User Manual