Chapter 2: Unpacking And Installation; Unpacking; Shipping List; Table 2-1 Airnet Ii 4-Channel Particle Sensor Shipping List - Spectris Particle Measuring Systems Airnet II 4-CH Operation Manual

Chapter 2
Unpacking and Installation

Unpacking

1. Carefully open the container and remove the Airnet II 4-Channel particle
sensor.
2. Ensure that all components listed in the following section are included, and
inspect each unit for any damage.
3. If any components are damaged, immediately notify the shipper and Particle
Measuring Systems.
4. After you have determined that the shipment is undamaged, store the packing
materials for future shipping needs. Warranties may not apply if return
shipping containers are inadequate.

Shipping List

Table 2-1 Airnet II 4-Channel particle sensor shipping list

Isokinetic air sampler (probe)
"L" Type mounting bracket (or one of three alternate brackets
Phone jack cable, RS-232
Operations manual
24 VDC / 4-20 mA output connectors (optional)
Molex Micro Fit 3.0 12-pin square receptacle (optional)
Molex crimp pins, female (12) (optional)
Ferrite (optional)
a. You must order alternate brackets in advance.
b. Used only for configuring the Airnet II 4-Channel particle sensor.
c. For large orders with multiple units, Particle Measuring Systems may
elect to limit the number of Operations Manuals included in the
shipment.
Airnet® II 4-Channel Particle Sensors Operations Manual
Part Name
b
c
Quantity
1
a
)
1
1
1
1
12
1
2-1