Siemens SIMPRO-100 Instruction Manual page 228

F
SIMPRO-100 Relay Settings Sheets
F.5 SER Settings
(SET R)
F.5.1 SER Trigger Settings
SER1
Range: 24 Relay Word bits, separated by commas.
Use NA to disable setting.
SER1 =
[IN1, IN2, IN3, IN4, IN5, IN6, IN7]
SER2
Range: 24 Relay Word bits, separated by commas.
Use NA to disable setting.
SER2 =
[STARTING, RUNNING, STOPPED, JAMTRIP, LOSSALRM,
LOSSTRIP, 46UBA, 46UBT, 49A, 49T,47T, SPEEDSW, SPEEDSTR, TRIP,
OUT1, OUT2, OUT3, 50G1T, 50G2T, 50N1T, 50N2T]
226
SER3
Range: 24 Relay Word bits, separated by commas.
Use NA to disable setting.
SER3 =
[RTDFLT, WDGALRM, WDGTRIP, BRGALRM, BRGTRIP,
AMBALRM, AMBTRIP, OTHALRM, OTHTRIP, 81D1T, 81D2T, 81D3T,
TRGTR, START, 50P1T, 50P2T]
SER4
Range: 24 Relay Word bits, separated by commas.
Use NA to disable setting.
SER4 =
[NA]
F.5.2 SER Alias Settings
Enable ALIAS Settings
Range: N, 1 – 20
EALIAS =
[17]
SIMPRO-100
PRIM-2400C