Serial Port Access Levels; Access Level 1; Access Level 2; Command Summary - Siemens SIMPRO-100 Instruction Manual

6
ASCII Serial Port Operation
6.6 Serial Port Access
Levels
The available serial port commands are listed in
Table 6.4. Some commands are not available at
Access Level 1 for security reasons. All
commands are available at Access Level 2.
6.6.1

Access Level 1

Access Level 1 is the lowest access level. The
relay serial ports are initially in Access Level 1
when you energize the relay. If left in Access
Level 2, serial ports automatically return to
Access Level 1 after a settable inactivity period.
When the relay is in Access Level 1, the relay
sends the following prompt when you press
<ENTER> or after a command response is
finished:
=>
The Access Level 1 commands primarily allow
the user to look at information (such as settings
and metering) but not to change it.
6.6.2

Access Level 2

The Access Level 2 commands primarily allow
the user to change relay settings, reset data
buffers, and control relay outputs. If left in Access
Level 2, serial ports automatically return to
Access Level 1 after a settable inactivity period.
All Access Level 1 commands are also available
in Access Level 2.
When the relay is in Access Level 2, the relay
sends the following prompt when you press
<ENTER> or after a command response is
finished:
=>>
88
6.7

Command Summary

Table 6.4 lists the serial port commands
associated with particular activities. All Access
Level 1 commands are also available in Access
Level 2. The commands are shown in upper-case
letters, but can also be entered with lower-case
letters.
Access Serial Port
Command Description Page
Level Command
Serial Port Access Commands
1
HELP Display available commands
1
2ACCESS Go to Access Level 2
2
ACCESS Go to Access Level 1
2
PASSWORD View/change password
2
QUIT Go to Access Level 1
Relay Self-Test Status Commands
1
STATUS Display relay self-test status
2
STATUS R Clear self-test status and
restart relay
Relay Clock/Calendar Commands
1
DATE View/change date
1
TIME View/change time
Meter Data Commands
1
METER Display metering data
1
METER D Display demand and peak
demand data
1
METER E Display energy metering
data
1
METER M Display max/min metering
data
1
METER T Display thermal metering
data
1
METER RD Reset demand ammeter
1
METER RE Reset energy metering
1
METER RM Reset max/min metering
1
METER RP Reset peak demand
ammeter
SIMPRO-100
89
89
89
93
93
95
96
90
97
91
91
92
92
92
92
92
92
92
PRIM-2400C