Installation; Panel Cut & Drill Plans; Figure 2.1 Simpro-100 Relay Mechanical Dimensions (Front And Top Views) - Siemens SIMPRO-100 Instruction Manual

SIMPRO-100

2 Installation

2.1 Panel Cut & Drill
Plans
Figure 2.1, page 27 shows the mechanical
dimensions of the SIMPRO-100 Relay.
Figure 2.2, page 28 shows the dimensions of the
panel cutout required to mount the relay.
Guard against accidental contact with relay rear
terminals by mounting the relay in an approved
enclosure or by using any of the following
methods:
• Locate the relay in a room, vault, or similar
enclosure that is accessible only to qualified
persons.
• Locate the relay on a suitable balcony, gallery,
or platform that is elevated and accessible
only to qualified persons.
• Use suitable permanent, substantial partitions
or screens arranged so that only qualified
persons have access to the space within
reach of live parts. Locate and size any
openings in partitions or screens so that
neither people nor conducting objects are
likely to come into accidental contact with live
parts.
PRIM-2400C
Figure 2.1 SIMPRO-100 Relay Mechanical
Dimensions (Front and Top Views)
2
Installation
27