Synchronize Time Manually; Set Ntp Server; Synchronize Time By Satellite - HIKVISION iDS-2CD7 G0 Series User Manual

iDS-2CD7xxG0-xxxxx Network Bullet Camera User Manual

Synchronize Time Manually

Steps
1. Go to Configuration → System → System Settings → Time Settings.
2. Select Time Zone.
3. Click Manual Time Sync..
4. Choose one time synchronization method.
• Select Set Time, and manually input or select date and time from the pop-up calendar.
• Check Sync. with computer time to synchronize the time of the device with that of the local PC.
5. Click Save.

Set NTP Server

You can use NTP server when accurate and reliable time source is required.
Before You Start
Set up a NTP server or obtain NTP server information.
Steps
1. Go to Configuration → System → System Settings → Time Settings.
2. Select Time Zone.
3. Click NTP.
4. Set Server Address, NTP Port, and Interval.
Server Address is NTP server IP address.
5. Click Test to test server connection.
6. Click Save.

Synchronize Time by Satellite

This function varies by device.
Steps
1. Enter Configuration → System → System Settings → Time Settings.
2. Select Satellite Time Sync.
3. Set Interval.
UM iDS-2CD7xxG0-xxxxx 021021NA 75