Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for ZKTeco FaceDepot 7B
Summary of Contents for ZKTeco FaceDepot 7B
- Page 1 Quick Start Guide FaceDepot 7B Version: 1.0 Date: October 2018...
- Page 2 Overview Flash Microphone Camera Connection interface Connection interface 7 inch touch screen Magnetic tamper switch Speaker Connection interface Reset USB port FP & RFID Reader (Optional) Fingerprint sensor Card reading area...
-
Page 3: Device Installation
Device Installation Method 1: Installation on the wall ① 1.5m ② ① Attach the mounting template sticker to the wall, and drill holes according to the mounting paper. Fix the back plate on the wall using wall mounting screws. ② Attach the device to the back plate. ③... -
Page 4: Standalone Installation
Standalone Installation Alarm Smoke detector Door Sensor Exit Button ZKBioSecurity Card TCP/IP Lock Reader Note: On this document, we just guide you to connect some normal components, if you want more connection of SRB, external fingerprint reader and so on, please check user manual document. -
Page 5: Lock Relay Connection
Lock Relay Connection The system supports Normally Opened Lock and Normally Closed Lock. The NO LOCK (normally opened at power on) is connected with 'NO' and 'COM' terminals, and the NC LOCK (normally closed at power on) is connected with 'NC' and 'COM' terminals. T NC Lock as an example below:... -
Page 6: Ethernet Connection
Barrier Connection 485A 485B TXD1 Barrier gate RXD1 TXD2 RXD2 Ethernet Connection ZKBioSecurity RJ 45 IP address: 192.168.1.130 Subnet mask: 255.255.255.0 Default IP address: 192.168.1.201 Subnet mask: 255.255.255.0 Click [Settings] > [Network Settings] > [TCP/IP Settings] > [DHCP], input the IP address and click [OK]. -
Page 7: Power Connection
Power Connection 12V DC Recommended power supply 1) 12V ± 10%, at least 00mA. 2) To share the power with other devices, use a power supply with higher current ratings. Quick Start User Registration View records User Authentication Verified User registration Register on the device Click >... - Page 8 Note: 1. It's recommended to register multiple administrators. 2. It's recommend enroll user's face in 0.5m distance, it's good for 1.4~1.8m height person. 0 5m Register on the software We recommend use ZKBioSecurity 3.1.5.0 or above. Please set the IP address and cloud service server address on the device. 1.
- Page 9 2. Click [Personnel] > [Person] > [New] to register users in the software. 3. Add users to access levels. 4. Click [Access] > [Device] > [Device Control] > [Synchronize All Data to Devices]. For more details, please refer to the ZKBiosecurity User Manual. Note: The icons in the standby interface indicates that the network connection or the server is abnormal.
- Page 10 Fax: +86 755-89602394 www.zkteco.com © Copyright 2018. ZKTECO CO., LTD. ZKTeco Logo is a registered trademark of ZKTeco or a related company. All other product and company names mentioned are used for identification purposes only and may be the trademarks of their respective owners. All specifications are...