Reassembly Of The Fluid Section - SAMES KREMLIN REXSON 2B225 User Manual

Disassembly / Reassembly Operation

Reassembly of the fluid section :

 Lubricate the wetting cup seals and the piston head seals,
 Slide the piston rod (11) assembly inside the body (7), push it
upwards,
 Screw the cylinder (21) (to top) into the body (7),
 Screw the foot-valve body (23) assembly to top, tighten
slightly,
 Reinstall the protection (4), the connection flange (1) and
the tie-rods (10). Screw the 2 nuts (16),
 Reassemble the pump to the pneumatic motor.
44