Injection Hazards; Fire Hazards, Explosion, Electric Arc, Static Electricity - SAMES KREMLIN REXSON 2B225 User Manual

Injection hazards

Fire hazards, explosion,
electric arc, static
electricity
"HIGH PRESSURE" technology requires the utmost care.
Operation can cause dangerous leaks. There is a risk of product
injection into exposed parts of the body, which can lead to serious
injury and the risk of amputation:
 An injection of product into the skin or other parts of the
body (eyes, fingers ...) must be treated urgently by
appropriate medical care.
 Do not look at the gun nozzle when it is under pressure.
 Never point the gun nozzle at another person.
 Never attempt to stop the jet with the body (hands, fingers
...) or with rags or similar.
Improper grounding, insufficient ventilation, open flames or sparks can
cause an explosion or fire which could result in serious injury.
To avoid these risks, especially when using pumps, it is imperative:
 Before operating the Pump supply system make sure that all
Pump equipment and material containers are grounded,
 To ensure good ventilation,
 Keep the work area clean and free of rags, papers, solvents,
 Do not operate electrical switches in the presence of vapors
or during removal,
 Immediately stop the application in the presence of arcs,
 Store all liquids outside the work areas.
 Use products whose flash point is as high as possible to avoid
any risk of formation of flammable gases and vapors
(consult the product safety data sheets).
 To equip the drums with a lid to reduce the diffusion of gases
and vapors in the cabin.
 It is forbidden to pump explosive materials
Safety instructions
11