Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for djpower H-6
Summary of Contents for djpower H-6
- Page 2 H-6 PRO FOG MACHINE Foreword Thank you very much for choosing DJPOWER H-6 Pro Fog Machine . Before start operating, we strongly suggest you read the user manual carefully. Following the instructions here will ensure your safety while operating the machine, easily achieve the best effects, as well as understand the right way to care for and maintain the machine, hence to prolong the product life cycle.
- Page 3 If problem could not be resolved, please contact with your dealer. Use only DJPOWER high-quality PRO-A or PRO-D fog liquid Never drink liquid. If it is ingested, call a doctor immediately for any discomfort. If liquid comes in contact with skin or eyes, rinse thoroughly with water.
- Page 4 H-6 PRO FOG MACHINE There are two buttons on the remote: ON/OFF. One unit can remember five different programming. This enables each unit to be controlled separately when being used together. Register wireless remote When the unit is powered on, and the wireless status is ON, the LCD display will show “wireless setup”.
- Page 5 Channel 2: Haze output. 0~5 OFF; 6~255 increase Service and Maintenance Please use DJPOWER fluid. It will prolong the lifetime of machines. To avoid danger, it is not allowed to take machine apart by unprofessional man. Neither to refit the machine.
- Page 6 H-6 PRO FOG MACHINE It is recommended to run the machine on a monthly basis in order to achieve best performance and output condition. All smoke machine will be blocked because of the inferior liquid or frequent use. Periodic maintenance is necessary for long term use. After 40 hours continuous working, please spray 10-15 times with the detergent composed of 35% vinegar and 65% distilled water.
- Page 7 H-6 PRO FOG MACHINE injection. First reason: Using the low quality or counterfeit fog fluid, low quality fog fluid have more impurities, easy to adhere to the pipe wall and hindered. First reason: Using the low quality or counterfeit fog fluid, low quality fog fluid have more impurities, easy to adhere to the pipe wall and hindered temperature transmission result in incomplete atomization caused fluid injection.
Need help?
Do you have a question about the H-6 and is the answer not in the manual?
Questions and answers