Connecting The Mains Cable; Wiring Diagram - T+A A 200 User Manual

Connecting the mains cable

Connect the power cord to the A 200's AC power input, then connect the device to the power supply.
To achieve maximum possible interference rejection the mains plug should be connected to the mains
socket in such a way that phase is connected to the mains socket contact marked with a dot. The phase
of the mains socket can be determined using a special meter. If you are not sure about this, please ask
your specialist dealer.
Do not connect the A 200 and the other components to the mains until all necessary connections between

the devices have been established.

Wiring diagram

DAC 200
A 200
* Use either the balanced XLR or the unbalanced RCA connection. It is not possible to
use both types of connection at the same time.
* *
Right Loudspeaker Left Loudspeaker
27