Settings for maintenance [Maintenance]
Settings for the hard disk can be performed. Checking the recording rate or image quality for each camera channel
is available.
Confirmation of recording rate and image quality for each camera channel [REC Rate
Status]
Recording rate in each recording mode for each camera channel will be displayed in list form.
Screenshot 1
Start operation after the submenu of the maintenance
menu is displayed by clicking the [Maintenance] button
in the [Setup] tab. (page 15)
Screenshot 2
The "Emergency recording rate list" screen will be dis-
played.
24
Step 1
Click "Recording rate list".
Step 2
Recording rate in each recording mode (shown below)
for each camera channel will be displayed in list form.
Numbers on the table indicate the current recording rate
(ips).
MANU:
Manual recording
SCHE:
Scheduled recording
PRE EVT:
Pre-event recording
POST EVT:
Post-event recording
EMR:
Emergency recording
SUPER FINE:
Top quality (SFA/SFB)
FINE:
High quality (FQA/FQB)
NORMAL:
Standard (NQA/NQB)
EXTENDED:
Low quality (EXA/EXB)