Panasonic WJ-HD309 Setup Instructions page 63

Screenshot 2
The "Camera Control Setup" menu will be displayed.
Step 2
Click the [i] button to select a communication method
for each camera channel to control cameras from the
following.
COAX: Controls cameras with coaxial communication.
(CAM 1 - 8 CH are available for the WJ-HD316,
CAM 1 - 6 CH are available for the WJ-HD309)
PSD: Controls cameras with PS·Data. (CAM 9 - 16 CH
are available for the WJ-HD316, CAM 7 - 9 CH are
available for the WJ-HD309)
RS485: Controls cameras with RS 485 communication.
(CAM 1 - 16 CH are available for the WJ-HD316,
CAM 1 - 9 CH are available for the WJ-HD309)
It is possible to compensate for the video signal trans-
mission loss from the camera when using the VIDEO IN
connector 1 - 8. (cable compensation)
Perform the settings for the cable compensation accord-
ing to the length of cable used.
S: When the length of cable used is shorter than 500 m
M: When the length of cable used is longer than 500 m
and shorter than 900 m
L: When the length of cable used is longer than 900 m
and shorter than 1 200 m
Notes:
• Use 5C-2V cables for the cable compensation.
• Perform the settings for the cable compensation
properly according to the cable length. Otherwise
camera pictures may not be displayed/recorded cor-
rectly.
Step 3
Click the [SET] button after completing the settings.
63