Panasonic WJ-HD309 Setup Instructions page 92

Setting of operation level [User Level Setup]
Assign a level (LV 1/LV 2/LV 3) to every user to restrict operable functions.
Screenshot 1
Start operation after the submenu of the communication
menu is displayed by clicking the [System] button in the
[Setup] tab. (page 15)
Screenshot 2
The "User Level Setup" menu will be displayed.
Notes:
• Each parameter of user level is as follows:
LV1: Possible to perform all the operations
(Administrators)
LV2: Possible to refer the settings of the unit and the
access log, and to perform the alarm reset (Head
of operators)
LV3: Possible to monitor or play the images
(Operators)
• The default settings are shown as in the magnified
picture above.
92
Step 1
Click "User Level Setup".
Step 2
Check the desired functions to allow to operate. To not
allow a user to operate certain functions, do not check
the respective function.
Refer to the next page for further information about
each function.
Step 3
Click the [SET] button after completing the settings.