Panasonic WJ-HD309 Setup Instructions page 85

Setup item
I Date Format
Select a date format to be displayed from the following.
(Example for April 1, 2003)
YY.MM.DD: 03.4.1
MMM.DD.YY: APR.1.03
DD.MMM.YY: 1.APR.03
I Time Format
Select a time format to be displayed from the following.
(Example for 3 o'clock in the afternoon)
24 h: 15:00:00
12 h: 3:00:00 PM
I SET (Clock settings)
Adjust the current time and date.
Enter numbers in order for year, month, day, hour and
minute, and then click the [SET] button.
Important:
Recording will stop for around 4 seconds just after
setting the clock.
I Auto Adjust Time
Select a method of auto clock adjustment from the fol-
lowing.
When "MASTER" is selected, signals will be supplied
from the ALARM/CONTROL connector to inform the
clock of the MASTER unit (see below) at a set time.
OFF: Does not adjust time automatically.
SLAVE: Receives a signal from the MASTER unit and
adjusts the clock.
MASTER: A signal will be supplied from the
ALARM/CONTROL connector on the rear panel of
the MASTER unit to the other connected devices
and the other devices will adjust their clocks with ref-
erence to the clock of this unit.
I Master Time
Set the clock for a signal to be supplied from the
ALARM/CONTROL connector (time adjustment I/O, pin.
no. 20) of the ALARM/CONTROL connector on the rear
pane of the unit.
I Summer Time (Day Light Saving)
Perform the settings for summer time from the following.
OFF: Does not apply summer time.
ON: Applies summer time.
AUTO: Applies summer time automatically in accor-
dance with the settings for switching to summer time
(Refer to the following).
I Summer Time (Day Light Saving) Table
Set the start (ON)/end (OFF) date and time for summer
time.
The following window will be displayed when the
[SETUP] button is clicked. Click the [SET] button after
completing the settings, and close window by clicking
the [×] button at the top right of the window.
Enter the last 2 digits for the year.
Up to 10 times and dates for switching to summer time
can be set.
85