Table of Contents
Advertisement
4
STRUCTURAL DESIGNATION KEY
VUT 300 EVK mini EC
Unit type
VUT - heat recovery ventilation
TECHNICAL DATA
The unit is designed for operation in an enclosed area at ambient temperatures from +1 ºC to +
40 ºC at relative humidity of up to 80%.
In order to prevent condensation on the internal walls of the units, it is necessary that the surface
temperature of the casing is 2-3 °C higher than the dew point temperature of the transported air.
The unit must be grounded!
Hazardous parts access and water ingress protection standard:
Unit motors - IP 44;
Unit assembly connected to air ducts - IP 22.
The unit series designations, their main outside and connecting dimensions, appearance and
technical data are given in figures 1, 2 and in Tables 1 and 2.
The unit design is regularly being improved, so some models can slightly differ from those ones
described in this manual.
Modi cation
K - kitchen hood
Spigot orientation
V - vertical
Electric heater
Air capacity, m³/h
300 - unit with an integrated control panel;
301 - unit with a remote control panel.
VUT 300 (301) EV(K) mini EC
Motor type
electronically commutated
Advertisement
Table of Contents
