Specifications; Combinations Of Cutting Attachments And Deflectors - Stihl FSA 57 Instruction Manual

English
Condition LED on
Charger

20 Specifications

20.1 STIHL FSA 57 Trimmer
– Approved battery: STIHL AK
– Weight without battery, cutting attachment and
deflector: 2,4 kg
– Length without cutting attachment: 1490 mm
up to 1690 mm
For battery life see www.stihl.com/battery-life.
20.2 STIHL AK Battery
– Battery technology: Lithium-ion
– Voltage: 36 V
– Capacity in Ah: see rating label
– Energy content in Wh: see rating label
– Weight in kg: see rating label
– Permissible temperature range for operation
and storage: -10°C to +50°C
20.3 Charger STIHL AL 101
– Rated voltage: see rating plate
– Frequency: see rating plate
– Rated power: see rating plate
– Charging current: see rating plate
– Permissible temperature range for use and
storage: + 5 °C to + 40 °C
The charging times are indicated at
www.stihl.com/charging-times.
20.4 Extension Cords
If an extension cord is used, the cross sectional
area of its conductors must meet the following
minimum requirements – depending on the line
voltage and length of the extension cord:
If rated voltage on the rating label is 220V to
240V:
– Cord length up to 20 m: AWG 15 / 1.5 mm²
– Cord length 20 m up to 50 m: AWG 13 /
2.5 mm²
If rated voltage on the rating label is 100V to
127V:
– Cord length up to 10 m: AWG 14 / 2.0 mm²
– Cord length 10 m up to 30 m: AWG 12 /
3.5 mm²
20.5 Noise and Vibration Data
K-value (uncertainty) for sound pressure levels is
2 dB(A). K-value (uncertainty) for sound power
18
Cause
Malfunction in
charger.
levels is 2 dB(A). K-value (uncertainty) for vibra‐
tion levels is 2 m/s².
STIHL recommends that you wear hearing pro‐
tection.
– Sound pressure level L
to EN 50636-2-91: 74 dB(A)
– Sound power level L
EN 50636-2-91: 89 dB(A)
– Vibration measurement a
ing to EN 50636-2-91; control handle and loop
handle: 4,0 m/s²
The vibration values quoted above have been
measured according to a standardized test pro‐
cedure and may be used to compare electric
power tools. Depending on the type of usage,
the vibrations that actually occur may differ from
the values quoted. The vibration values quoted
may be used for an initial assessment of the
user's exposure to vibrations. The actual expo‐
sure to vibrations has to be estimated. This proc‐
ess may also take into account times during
which the electric power tool is switched off and
times during which it is switched on but running
off load.
For information on compliance with Vibration
Directive 2002/44/EC visit www.stihl.com/vib.
20.6
REACH is an EC regulation and stands for the
Registration, Evaluation, Authorisation and
Restriction of Chemical substances.
For information on compliance with the REACH
regulation see www.stihl.com/reach.
21 Combinations of Cutting
21.1
The following mowing heads may be mounted
with the deflector:
STIHL AutoCut C 3-2 mowing head:
– with round, low-noise mowing line with a
PolyCut 3-2 mowing head
– with blades
Remedy
► Do not use the charger and contact your
STIHL servicing dealer.
pA
measured according to
wA
REACH
Attachments and Deflec‐
tors
STIHL FSA 57 brushcutter
diameter of 1.6 mm or 2.0 mm
0458-806-0121-B. VA0.M20.
20 Specifications
measured according
measured accord‐
hv