Table of Contents
Advertisement
Simrad GC80/85 Compact MK2 Gyro Compass
Note!
988-12718-003
Activating the GC80 or GC85 Control unit
When the Gyro system is shipped from factory, all DIP switches in the
Control unit are set as a standard GC80 system.
Before the system is started, the switch settings described below have to
be changed to match a GC85 system.
DIP switch no.2 on S1 on the ICNT board identifies the Gyro as a GC80 or
GC85 system.
GC80 system
All outputs are selectable for 1, 5, 10 or 50 Hz.
Refer
DIP SWITCH SETTINGS
A GC85 system is recommended to be set for 50 Hz output!
GC85 system
on page 101 onwards.
52
Advertisement
Table of Contents
