Table of Contents
Advertisement
2.3
System components
Note!
2.4
Bearing repeaters
13
-
Perform daily checks to maintain normal system operation. Refer
MAINTENANCE page 33 onwards.
-
If any unusual behavior is observed during daily inspections, the
cause should be found and corrected. If necessary, the local
Simrad dealer should be contacted.
-
If any alarm is generated, verify the reason for the alarm.
A GC80/85 Compact Gyro compass includes the following units:
-
Master compass with Sensitive element
-
Compact MK2 Control unit
-
Power Supply unit (Optional)
For details, refer TECHNICAL SPECIFICATIONS, page 76.
GC80 and GC85 outputs step and serial signals used for repeaters. Even
when the emergency power supply is used, the connected repeaters will
be powered by the repeater backup function included in GC80/85.
The following serial signals may be selected:
Lo speed:
IEC61162-1 ed.4 (4800 and 38400 baud possible)
High speed:
IEC61162-2 ed.1 (38400 baud possible)
SYSTEM OVERVIEW
988-12718-003
Advertisement
Table of Contents
