Delay Function; Cleaning And Maintenance; Removing Mineral Deposits - Fagor FG784 Manual

DELAY FUNCTION

If you do not want the coffee maker to start operation immediately, for example now it is AM 8:10, you hope that the coffee maker
will automatically start working at PM 1:00, first follow steps 1 to 5 of "USING YOUR COFFEE MAKER", and then you can set
the automatic start function as follows:
1. Set the current time that is AM 8:10 by pressing the buttons of "HOUR" and "MINUTE".
Note: The time cycle is 12 hours.
2. Press PROGRAM button once, ON/OFF indicator flashes in green, the LCD display indicates "AM 12:00" flickeringly. Set the
automatic start time that is PM 1:00 by pressing the buttons of "HOUR" and "MINUTE".
3. Press the DELAY BREW button, the ON/OFF indicator illuminates in green solidly. After a while, the LCD display indicates the
current time.
Note: You may cancel the automatic start function by pressing DELAY BREW button. If you want to change the automatic start
time, only following the above steps 2-3 again.
4. When the time is due, the ON/OFF indicator will illuminate in red and the appliance starts brewing. When the process is
finished, if you do not want to serve immediately, keep the coffee maker is energized, the coffee can be kept warm on the
warming plate. And the appliance will shut off automatically after 40 minutes from the ON/OFF indicator illuminates in red if it has
not been manually disconnected at the completion of brewing. For an optimum coffee taste, serve it just after brewing.
Note: During brewing process, the buttons of "PROGRAM","DELAY BREW" ,"HOUR" and "MINUTE" are invalid.

CLEANING AND MAINTENANCE

CAUTION: Be sure to unplug this appliance before cleaning. To protect against electrical shock, do not immerse cord, plug or unit
in water or liquid. After each use, always make sure plug is first removed from wall outlet.
1. Clean all detachable parts after each use in hot sudsy water.
2. Wipe the exterior surface of unit with a soft, damp cloth to remove stains.
3. Water droplets may buildup in the above area of the funnel and drip onto the product base during brewing. To control the
dripping, wipe off the area with a clean, dry cloth after each use of the product
4. Use a damp cloth to gently wipe the warming plate. Never use abrasive cleaner to clean it.
5. Replace all parts and keep for next use.

REMOVING MINERAL DEPOSITS

To keep your coffee maker operating efficiently, periodically you should clean away the mineral deposits left by the water
according to the water quality in your area and the use frequency, we recommend removing mineral deposits as follows:
1. Fill the tank with water and descaler to the max level as indicated on the water level gauge (the scale of water and descaler is
4:1, the detail refers to the instruction of descaler. Please use "household descaler", you may also use the citric acid instead of
the descaler (the one hundred parts of water and three parts of citric acid).
14