Connections - MCK EXTender 4000 Quick Installation Manual

Connections

The EXTender 4000 requires connections A through D as shown in Figure 2.
Letter Label
A PHONE
B PC
C LAN
D +12 VDC
Notes:
* The PC port is a hub style Ethernet port and should connect only to an Ethernet station.
** The LAN port is a station-side Ethernet port and should connect only to an Ethernet hub. It operates
only on 10 megabit Ethernet networks. It does not support 100 megabits.
EXTender 4000 Universal Quick Installation Guide
Figure 2:
Cable Type
Cat 3 with RJ-11 connectors
Cat 3/5/6 with a RJ-45
connectors
Cat 3/5/6 with a RJ-45
connectors
Power Supply
Back of Extender 4000
Connects to....
one digital telephone
NIC card on the PC *
a Hub/Repeater or Switch on Local Area
Network (LAN)**
a 12 VDC power supply (comes with the
unit)
11